• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

GT6 TR3 Wiring Loom...where do I start??

Share this page

doc50

doc50

Jedi Trainee
Offline
I'm standing here with my new wiring loom and I feel like a monkey with a typewriter...where do I start?
I've heard the horror stories about running the wire..then having to redo it from the other end...Any suggestions?
(Pix will be very helpful!)
Thanx!

Thom`
1959 TR3
TS34909L
 
Thom, I just finished installing a new cloth loom from British Wiring ( very pleased with quality) in my TR3. I started in the rh footwell. First , install the large grommets on to the two loom legs that will pass through the firewall. Then feed each leg through the firewall and carefully install the grommet in each hole from the inside. Is the old harness in place still? Kevin
 
Back
Top