• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR2/3/3A TR3 wind shield

Share this page

tinman58

tinman58

Jedi Knight
Country flag
Offline
I have a nice windshield frame that I am going to have recromed. But there are six holes that the hard top would mount to. I won't have a hard top, What would be the best way to fill in the mounting holes?
 
IMO, just leave them alone. They will be hidden by the top gasket (assuming you replace it rather than reusing the one that was cut to go around the HT brackets).
 
tinman58 said:
I have a nice windshield frame that I am going to have recromed. But there are six holes that the hard top would mount to. I won't have a hard top, What would be the best way to fill in the mounting holes?
Click to expand...

Dan: not worth filling in. Leave them. You may change your mind about a hardtop and they should be covered by the rubber top-to-windscreen rubber.
 
Thanks Guys I will leave it as is. Didn't think of the rubber covering them up!
 
Back
Top