• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 Vent Rod

Share this page

CJD

CJD

Yoda
Country flag
Offline
I'm stumped. I thought I had all the vent parts ready to install, but found I am missing the vent knob sheath. This is the part that screws into the dash, and through which the vent rod slides. I don't remember ever seeing it...and the vent did not operate when I got the car, so I suspect I never had it.

So, I'm either missing the part entirely, or don't know what it looks like and it's staring me in the face. If anybody has a picture, I would really appreciate it. That way at least I will know what I'm looking for!?!

Thanks...


John
 
Don't have a picture handy, but the only "sheath" is a small rubber grommet and the shiny escutcheon on the top rail.

The grommet looks similar to the ones where the speedo cable, etc. come through the bulkhead, but is much smaller in diameter (roughly half).

That's how the pre-TS60k cars are, anyway. I'm not certain about the later bodies offhand.
 
this one
 

Attachments

  • 26885.jpg
    26885.jpg
    69 KB · Views: 171
Oh...I do have that. I was looking at the rod and it seems to have a fancy brass fitting with a slot that looks like it would fit into something more elaborate. I convinced myself there had to be more to it...false alarm!

Thanks again Guys!

John
 
Back
Top