• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 temp sensor hole plug?

Share this page

C

chrissmith

Freshman Member
Offline
Hi all,
Any suggestions on what I can use to temporarily plug the threaded hole for the temp sensor on a TR3? I do not have an original, so I would like to plug the hole so I can work on some debugging while I search out a proper replacement. Will a TR6 sensor fit?

Thanks
 
I believe that I've seen some suggestions on here to use an early TR4 electric temperature gauge and sending unit as those gauges have the same design as the TR3 gauges. (curved glass and fully exposed needles).

Scott
 
Another possibility is a cheap 2" mechanical gauge from your local auto parts. The Sunpro I picked up fit perfectly, except I had to connect the wire for the light into the dash lights.

TS13571LInstrumentPanelcropped.jpg


I think this is the same gauge at Amazon (got mine at Pep Boys):
https://www.amazon.com/Sunpro-CP7975-Mechanical-Water-Temperature/dp/B00029JXQ6

If you go with the TR4 gauge, you'll also need a voltage "stabilizer" or otherwise it will read high (and vary with whether the generator is working or not).
 
Thanks guys. I picked up a guage assembly at Napa today for 17 bucks. Never would have guessed an auto parts store would have something for this car, let alone in stock and affordable.
 
Back
Top