-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A TR3 Slave cyclinder leak.
- Thread starter Lukens
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
Whether it works or not depends a great deal on the condition of the bore. If the bore is severely pitted where the seal rides, it will quickly wear out the new seal and go back to leaking.
That said, I'm still running what I think is probably the original cylinder, although no doubt rebuilt many times by now. Someday I hope to learn how to resleeve the cylinder myself, but I'm probably several years away from that.
That said, I'm still running what I think is probably the original cylinder, although no doubt rebuilt many times by now. Someday I hope to learn how to resleeve the cylinder myself, but I'm probably several years away from that.