• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR3 seat frame issue

Share this page

B

BritCars54

Member
Offline
Is there any other option for mounting the seat/spring to the seat frame on a TR3? Very difficult to have the rods on the bottom of the spring assembly catch the riveted clip of the seat frame, and does not seem very stable.
 
I think that's about it... tip/push/sit. You must have redone the upholstery and now it's a tight fit??
 
The upholstery has definitely been redone. Does not seem to catch and may need to open up the clips a bit. Thanks.
 
Back
Top