• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 or 4 Mechanical Fuel Pump Blanking Plate

Share this page

MGTF1250Dave

MGTF1250Dave

Jedi Knight
Country flag
Offline
Aloha All,

Does anyone know of a source for a blanking plate to cover the mechanical fuel pump attachmnet hole on a TR3 engine Block? I have a friend who has converted to an electric pump.

Safety Fast,
Dave
 
Go to a steel supplier get a piece of 1/8 plate large enough to cover it and cut it down to the right shape then drill two holes. Why spend money on something you can easily make?
 
Easy to make. Too, I would use a bit of Permatex aircraft sealant. That syrupy, brown, sticky sealer that seals nicely against oil products.

Bill
 
Thanks, using the gasket as a template is a good suggestion, I'll just make one up.

Mahalo,
Dave
 
Back
Top