• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 Monza Exhaust installation

Share this page

TRclassic3

TRclassic3

Jedi Trainee
Country flag
Offline
I have one of these systems on the way. Any tips or tricks, or horror stories about installation? Looks like from the picture that the original rear hanger is not used. I that correct? Is a new hanger mounted further back? Appreciate the input.
 
Hi Ed, Hope that you get a good answer. I have one to install as well. I did try and install it earlier but I also run a rear sway bar on my 3A. The rear sway bar will need to be removed or my rear pipe will need to be bent to accommodate it unfortunately. Cheers M. Pied Lourd
 
Back
Top