Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
mrv8q
Luke Skywalker
Offline
So I'm rebuilding the clutch side MC:
and I'm looking at the Service Instruction Manual, since it's been 5 years since I've been in here last.
In the TR3 model Supplement, Brakes, section R, page 6, diagram 5, it shows an end seal, where I think (in my photo), it would go on the plunger part, (under the ridge of the MC in the photo).
No such seal in the rebuild kit, no such part in the blue Spare Parts Catalogue, (which doesn't seem to have updated TR3 diagrams w/ Stanpart numbers). My MC was so cruddy on that end, I can't really tell if there even was a seal there. The MOSS catalogs don't show a seal.
Referring back to the diagram, anyone got a spare valve spacer, (leftmost part in the pic) in good shape? Mine's pretty crunchy...
Thanks, all!
and I'm looking at the Service Instruction Manual, since it's been 5 years since I've been in here last.
In the TR3 model Supplement, Brakes, section R, page 6, diagram 5, it shows an end seal, where I think (in my photo), it would go on the plunger part, (under the ridge of the MC in the photo).
No such seal in the rebuild kit, no such part in the blue Spare Parts Catalogue, (which doesn't seem to have updated TR3 diagrams w/ Stanpart numbers). My MC was so cruddy on that end, I can't really tell if there even was a seal there. The MOSS catalogs don't show a seal.
Referring back to the diagram, anyone got a spare valve spacer, (leftmost part in the pic) in good shape? Mine's pretty crunchy...
Thanks, all!
