-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A TR3 inside door linkage
- Thread starter TFB
- Start date
Share this page
vivdownunder
Jedi Warrior
Offline
Tom, I can't recall these parts ever being sold as seperate repro items. They have always come already fixed to the TR3A-TR3B door latches - LH p/n 650103 or RH p/n 650104.
Not expensive to buy the whole door latch from The Roadster Factory. Or put out a call for someone with spare used doors who will sell you a latch assembly for the parts you need.
Regards,
Viv.
Not expensive to buy the whole door latch from The Roadster Factory. Or put out a call for someone with spare used doors who will sell you a latch assembly for the parts you need.
Regards,
Viv.
Viv,
Thanks,I bought a new tiawan latch,very nice actually,but no linkage,then just bought two originals with all but one L bracket,on Ebay.
I am getting list together and will call TRF,but thought the new latches included no linkage.
I also had good experience sourcing some missing bits from fellow forum member Marv Gruber.
Thanks
Tom
Thanks,I bought a new tiawan latch,very nice actually,but no linkage,then just bought two originals with all but one L bracket,on Ebay.
I am getting list together and will call TRF,but thought the new latches included no linkage.
I also had good experience sourcing some missing bits from fellow forum member Marv Gruber.
Thanks
Tom
vivdownunder
Jedi Warrior
Offline
Great Tom. The Taiwan latch was probably p/n 602090RH or 602089LH made for a TR2 which didn't use the slotted plate and L shaped lever, not having door handles.
The Roadster Factory only sells the later latch with the slotted plate and lever for cars with door handles.
Regards,
Viv.
The Roadster Factory only sells the later latch with the slotted plate and lever for cars with door handles.
Regards,
Viv.
luke44
Jedi Warrior
Offline
Hi Tom - take a look at this thread. Are these the parts you need?
https://www.britishcarforum.com/bcforum/u...arts#Post678391
https://www.britishcarforum.com/bcforum/u...arts#Post678391
Luke,
Thanks for post to that forum link,the pics help alot.
My doors came bare,and frankly I didnt even know there was additional linkage until I went to fit the new Tiawan latch that came with none.
The two used latch assemblies that I bought are missing one L lever and havent come yet, but the pic shows square hole on L lever,so the pic on old thread of the one with teardrop hole is different.
Thanks
Tom
Thanks for post to that forum link,the pics help alot.
My doors came bare,and frankly I didnt even know there was additional linkage until I went to fit the new Tiawan latch that came with none.
The two used latch assemblies that I bought are missing one L lever and havent come yet, but the pic shows square hole on L lever,so the pic on old thread of the one with teardrop hole is different.
Thanks
Tom
luke44
Jedi Warrior
Offline
TFB said:
Tom - look closer at the picture of the red door in my posting - the "L" lever actually is made of 2 pieces - the "teardrop" hole has to have a pot metal insert (arrow pininting to part #2) inside it to form the square hole. That's the piece I had trouble finding - and you will too - they are nla. You have to source used for those.