• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A TR3 hydraulics reservoir

Share this page

I have a couple of reservoirs taken apart somewhere; I do not remember an allen fitting. i will find them and look
steve
 
thanks, Steve. On holding the light some distance from the top of the res., it is clear that there are external hex heads on the can side of the nipples. The hex sockets are there, but might at most be 1/8, clearly not enough for any useful torque to be applied. In one of my toolboxes, I recall that there is an old deep socket with the outside of the opening seriously ground down. I see a connection.
Bob
 
Back
Top