Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
For those who followed my tappet dilemma, the continuation is:
Head off and valve leakdown passed fine.
Possibility of a porous head, as I am loosing solvent from the 2 frt cylinder chambers. High ambient temp may be a cause, but is porosity an issue on these high port heads?
Ridge/space under the sleeves at about 3.5 thou...on spec.
Bores clean and pistons clean.
The broken pieces from the pushrods were sitting next to the hole were the tappet sits.
Camshaft. Do you guys have specs for cam lift? Nothing in my books/manuals. Would like to know if the cam is ok. Looking good from above LOL.
I can't find a way to attach pictures
Dorien
Head off and valve leakdown passed fine.
Possibility of a porous head, as I am loosing solvent from the 2 frt cylinder chambers. High ambient temp may be a cause, but is porosity an issue on these high port heads?
Ridge/space under the sleeves at about 3.5 thou...on spec.
Bores clean and pistons clean.
The broken pieces from the pushrods were sitting next to the hole were the tappet sits.
Camshaft. Do you guys have specs for cam lift? Nothing in my books/manuals. Would like to know if the cam is ok. Looking good from above LOL.
I can't find a way to attach pictures
Dorien
