• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A TR3 gas tank inlet size?

Share this page

K

karls59tr

Yoda
Bronze
Offline
Anyone know the thread type of the gas line inlet in the tank ...where the the line goes into the tank? it's either 1/2" National Fine or 1/4" NPT?Can't tell and don't want to cross thread the inlet.
 
In or out??
If it's 1/4 NPT I've never seen a Gas dispenser that small
 
Are you talking about the vent line on top of the tank? Or the outlet fitting in the bottom?

Either way, not NPT threads. The top fitting is a banjo fitting (hence straight threads) and the bottom is a 5/16" reverse compression (also straight threads).

The actual tank inlet is not threaded at all.
 
Back
Top