• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 front suspension

Share this page

martx-5

martx-5

Yoda
Country flag
Offline
I've read about putting TR4 front end parts on the TR3 to get the 3 degrees of castor. Exactly what parts need to be replaced??
 
Wow, I would have thought that this procedure would have been done as a matter of course when changing trunnions and redoing the front end. Maybe more has to be changed then I thought.

I know someone out there has the answer. /ubbthreads/images/graemlins/driving.gif
 
You'll need new upper ball joints, 3 deg trunnions, and upper wishbones. While you're at it, you may as well put some negative camber on too if you're using modern tyres and a rack, revington tr's adjustable upper kit is good for this, but needs welding in it's final position when you've set it up before you can drive it.
 
Back
Top