Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Has anyone else had a problem with the 3 bolts on the bottom of a tr3 front fender were that bolts to the inner sill? For me there always seems to be a very tight fit there. I was thinking of providing a little more room by taking the original 90 degree bend off and putting a 3/16 drop/jog on that outer 90 where that bolts to the inner sill on the bottom to give a little more room.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR2/3/3A tr3 front fender
- Thread starter sp53
- Start date
Share this page
Marvin Gruber
Yoda
Offline
Has the sill been replaced or the fender been repaired? Fender should bolt in with no problems.
Marv
Marv
Marvin Gruber
Yoda
Offline
Need a picture to give us some detail as too what we are looking at.
marv
marv