• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 fan pulley hub

Share this page

TRclassic3

TRclassic3

Jedi Trainee
Country flag
Offline
Anyone happen to know the correct speedi sleeve to use and the best source?

TIA
 
I believe I got P/N 99175, which fits a 1.75" shaft and is .875" wide overall. But my local NAPA store (Gardena,CA) had 99174 listed in their catalog, which is the next size narrower.

However, the NAPA in Torrance, CA (closer to where I work) only carried a substitute line of sleeves (FelPro I think), which didn't cover the TR3 (even when looking up by size). I guess not all NAPA stores are created equal.
 
I used 99174 and it worked fine as well. Suggest Rockauto, they have National, SKF and Timkin sleeves and you can find them most times for less than $30 with shippping factored in.
 
Back
Top