-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A TR3... Double Clutch or Syncromesh?
- Thread starter Aldwyn
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
Synchomesh on 2,3,4; none on 1st or reverse. Some TR3B got the later box with synchro on 1st (but still not reverse).
Sometimes the 2nd gear synchro is worn out as well, so it's not unusual to find one that acts like it only has synchro on 3 & 4. Possibly that's because people learn to use the 2nd gear synchro to stop the countershaft before shifting into 1st or revers.
Likewise, lots of folks retrofit the 4-synchro box into their TR3s (as I did). Not quite a drop-in, but an easy modification.
Good luck double clutching into 1st, I could never do it smoothly. Easier to start in 2nd gear if not a complete stop. 1st is also a lower ratio on the crash box than on the later 4 synchro boxes. If you need a stump pulled ...
Sometimes the 2nd gear synchro is worn out as well, so it's not unusual to find one that acts like it only has synchro on 3 & 4. Possibly that's because people learn to use the 2nd gear synchro to stop the countershaft before shifting into 1st or revers.
Likewise, lots of folks retrofit the 4-synchro box into their TR3s (as I did). Not quite a drop-in, but an easy modification.
Good luck double clutching into 1st, I could never do it smoothly. Easier to start in 2nd gear if not a complete stop. 1st is also a lower ratio on the crash box than on the later 4 synchro boxes. If you need a stump pulled ...
Offline
2's and 3's were synchromesh in 2nd-4th.
Twosheds
Darth Vader
Offline
Quick reply:
First gear is non-synchro, rest have synchro.
I double clutch and heel-and-toe going from 4 to 3 to 2 because I can and it's cool to do. Easier on the clutch to match RPMs. It's not necessary, though. I don't double clutch going up.
I come to a complete stop to go from 2 to 1. Sometimes I have to go to 2 from neutral before going into 1; prevents grindin' gears.
First gear is non-synchro, rest have synchro.
I double clutch and heel-and-toe going from 4 to 3 to 2 because I can and it's cool to do. Easier on the clutch to match RPMs. It's not necessary, though. I don't double clutch going up.
I come to a complete stop to go from 2 to 1. Sometimes I have to go to 2 from neutral before going into 1; prevents grindin' gears.
Hello all,
a little useless information; I passed my driving test ina Ford Consul, mid fifties model I think, which is a three speed car with synchromesh on second and top. Now the law in the U.K. then (probably still is)was that you had to be able to select first gear on the move, so the need to be able to demonstrate that you could double de-clutch was a requirement.
Actually it is not that difficult and having the confidence helps if you happen to suffer an inoperative clutch and need to change gear without it.
Alec
a little useless information; I passed my driving test ina Ford Consul, mid fifties model I think, which is a three speed car with synchromesh on second and top. Now the law in the U.K. then (probably still is)was that you had to be able to select first gear on the move, so the need to be able to demonstrate that you could double de-clutch was a requirement.
Actually it is not that difficult and having the confidence helps if you happen to suffer an inoperative clutch and need to change gear without it.
Alec