-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A TR3 body fitting question....
- Thread starter karls59tr
- Start date
Share this page
PatGalvin
Jedi Warrior
Offline
When I removed body, there was one fibrous washer in place, maybe 1/8 inch thick. When I replaced body, I fitted nearly the same using a rubber washer.
I may be corrected, but I think you just want to fit enough washers in this location to support the back of the tub evenly. Make sure the doors fit well, after you fit these washers.
Pat
I may be corrected, but I think you just want to fit enough washers in this location to support the back of the tub evenly. Make sure the doors fit well, after you fit these washers.
Pat
