• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A TR3 A Gear shift question

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
Does the anti rattle spring and plunger at the bottom of the gear shift lever face the transmission or the diffy?

Thanks, Tinkerman
 
I'm not convinced it actually makes any difference at all.
But on the later TRs with curved handles (that only fit one way), the anti-rattle plunger is to the rear (towards the diff).
 
On the same topic, what is the theadsize for a TR3 gear shift lever? I bought one of ebay, and it looks like it is 7/16" with a fine thread pitch, but the knob I got from Moss looked like is 5/16 course. Anyone know?
 
Yes, it's a real strange size...7/16" x 32 tpi....
 
Back
Top