Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
OP
Offline
I sure am happy it is building pressure, but I wouldn't say I was sweating bullets I lubed everything up, so wan't to worry about wearing it out spinning it on the starter, but I was worried about the possibility of maybe having some oil line blocked or a pump issue that would require pulling or dissassembling the motor in situ.
I wired up the ignition last night just to see if it would fire, not luck, but I am not asking for help at this point, I did test for spark, but haven't verified if the float bowls or full or done anything but a real quick and dirty timing check, I will dial it in a little more precisely tommorrow night and see what happens.
Thanks for words of wisdom and support, Greg
I wired up the ignition last night just to see if it would fire, not luck, but I am not asking for help at this point, I did test for spark, but haven't verified if the float bowls or full or done anything but a real quick and dirty timing check, I will dial it in a little more precisely tommorrow night and see what happens.
Thanks for words of wisdom and support, Greg