• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR5/TR250 TR250 TR4 Trunk Hinge Pin Missing

Share this page

Got_All_4

Got_All_4

Luke Skywalker
Country flag
Offline
Went to do some work on the 250 today and I had forgotten that the pin on the rear trunk hinge had fallen out and lost last fall. I was going to make one today and took some measurements using drill bits and it seems like there are 3 steps to it. I do have a lathe but don't have time to make one. Anyone know of where I could order one?
 
I don't think they are sold separately - best bet I think is find a donor hinge for the part. If you don't have any luck, pm me as I have one or two very grungy and broken hinges that potentially could supply the pin.

Randy
 
OK THANKS GOOD IDEA. i'LL CHECK WITH TEAM TRIUMPH SOME TIME THIS WEEK. I'D MAKE ONE BUT DON'T HAVE A WAY TO CUT THE SPLINES.
 
Back
Top