-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR5/TR250 TR250/6 Telescopic rear shock retrofit
- Thread starter angelfj1
- Start date
Share this page
D
DougF
Guest
Guest
Offline
The bolt on type are very easy to install. They just mount in the existing holes for the lever shocks. No drilling.
My experience is a stiffer ride that I got used to very quickly. Also, they've nearly eliminated the bottoming out I experience with the Goodparts springs.
My experience is a stiffer ride that I got used to very quickly. Also, they've nearly eliminated the bottoming out I experience with the Goodparts springs.
GreenOne
Senior Member
Offline
Check out Blind Moose, they offer one of the better conversion kits around and although they usually only fill bulk orders I'm pretty sure he has some available now. I converted last spring and never looked back.
https://www.blindmoosefab.com/rear_shock.htm
https://www.blindmoosefab.com/rear_shock.htm