• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR5/TR250 TR250/6 engine mount

Share this page

glemon

glemon

Yoda
Bronze
Country flag
Offline
I am in the process of putting the motor back in my TR250, the engine mounts, the all metal part that bolt to the block, they look as they either one could go on either side and work, but they are not symmetrically braced on the inside and have a couple small holes (like 1/8" or so) do those little holes go towards the back or the front, also does the rubber mount bolt in front of or behind the attachment point to the car, thanks in advance, Greg
 
Thanks, that helps, may have been worried about it too much all made sense and worked out fine as I installed it. The motor is in!
 
Back
Top