• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2 manifold question

Share this page

L

Lockheed-driver

Freshman Member
Country flag
Offline
Hi All. I’ve been restoring a TR2 for some time now. Learning as I go. I have both manifolds restored and ready to install. I started to look at the box full of bits that the previous owner had used to fix the manifolds to the head. Turns out he’d used UNC bolts as opposed to the original stud / nut arrangement. Am I missing some local TR knowledge? Are bolts an easier option? Or was it a lazy option by the previous owner?
Any help would be great appreciated.
cheers.

Neil.
 
I would get a set of studs fitted makes fitting the manifolds a lot easier( if you look on Rimmer Bros web site they give all the different lengths you need) The studs are unc into the head and unf for nuts
 
Back
Top