Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Cutlassboy68
Freshman Member
Offline
So Ive had this car for a while in storage and Ive finally cracked it out and trying to figure out exactly what it is.
It is (or supposed to be) a TR-2 and im wanting to put it on the track. The motor is currently apart and needing to know what all i need to do to get the engine track ready along with what Horsepower I can feasibly get out of her.
It has a Judson Supercharger unit on it but I think that putting some Webers would be more reliable or should i run the Judson?
The Judson is really cool...
Ill get some pictures of what I have.
The motor currently has an 86mm bore, flat top pistons, hi-port head with 1.5'' intake ports, 3 springs/ Valve. I have not measured the Valve sizes yet, or checked to see if the head has been shaved.
The chassis is solid axle rear, but im not sure how to tell which chassis it is.
Ill post some pictures soon.
I posted this in racing and here, Since im new and not really sure best place to get answers...
It is (or supposed to be) a TR-2 and im wanting to put it on the track. The motor is currently apart and needing to know what all i need to do to get the engine track ready along with what Horsepower I can feasibly get out of her.
It has a Judson Supercharger unit on it but I think that putting some Webers would be more reliable or should i run the Judson?
The Judson is really cool...
Ill get some pictures of what I have.
The motor currently has an 86mm bore, flat top pistons, hi-port head with 1.5'' intake ports, 3 springs/ Valve. I have not measured the Valve sizes yet, or checked to see if the head has been shaved.
The chassis is solid axle rear, but im not sure how to tell which chassis it is.
Ill post some pictures soon.
I posted this in racing and here, Since im new and not really sure best place to get answers...
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.