• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR- 7 onvertible top Install: Looking for help

Share this page

M

mk2sprite

Jedi Hopeful
Offline
Can someone point me in the right direction for instructions on how to properly install a new soft top on a Wedge?
Also possible outlets where I can buy one?
Trying to help a friend in need.
Thanks
Mike
 
Hey, Mike -

As for where to buy, the usual suspects (Moss, Victoria British, and The Roadster Factory).

And for installation:

Click here.

Good luck!

Mickey
 
You might want to call Woody @ The Wedge Shop.....I know he must have done about 200 tops in the last 10 years plus. He also sells them too. I have done about 30 or 40 of them too! There are a few tricks to them where the window vent with folding or the materials the intersect in that particular region. The other bit of advice is to look at the holes for the hold down/header strip to make sure the holes are not over sized. If the are your going to bein trouble because the rivet to hold the rail down goes inside of the rail and a weather strip goes inside of that. If you use a bigger rivet you will bnot be able to get the seal in the track and it might work loose. If you have plastic snaps on the car itself replace them too with metal ones.
 
Back
Top