-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR2/3/3A TR-3B Horns
- Thread starter af3683
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
Or download it from https://docs.google.com/open?id=0B2H2NJt34OffYTA1NTNmMGUtMTVjMy00NDEzLWJjN2YtNTc1OWRkNjE4MjY4
However, it mentions only in passing what I think is most likely: There is a pushrod under the contacts that carries motion from the diaphragm to the contacts. It tends to rust and bind in the hole. It should be snug, but slide easily.
However, it mentions only in passing what I think is most likely: There is a pushrod under the contacts that carries motion from the diaphragm to the contacts. It tends to rust and bind in the hole. It should be snug, but slide easily.