Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
D
Deleted member 21878
Guest
Guest
Offline
hope to start putting the rear back in the car this weekend. is there some place i can get the torque values for all the bolts/nuts?
Thanks
Thanks
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Share this page
Bob_Spidell
Yoda
Offline
Some of the major ones--head nuts, etc.--are in the shop manual. For others, try this:
https://www.boltdepot.com/fastener-information/bolts/US-Recommended-Torque.aspx
https://www.boltdepot.com/fastener-information/bolts/US-Recommended-Torque.aspx
OP
Deleted member 21878
Guest
Guest
Offline
thanks for the info. just working on the rear at this point and did not see anything in the manual i have. used to having a list for things like shock links, spring bolts, etc on other cars i have worked on. guess i will measure all the bolts and used the table,,, plus lots of loc-tite.
but also remember having jam-nuts on the u-bolts that hold the springs to the axle... but my car did not have them when i took the axle out.
but also remember having jam-nuts on the u-bolts that hold the springs to the axle... but my car did not have them when i took the axle out.