Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
D
Deleted member 21878
Guest
Guest
Offline
hope to start putting the rear back in the car this weekend. is there some place i can get the torque values for all the bolts/nuts?
Thanks
Thanks
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Share this page
Bob_Spidell
Yoda
Offline
Some of the major ones--head nuts, etc.--are in the shop manual. For others, try this:
https://www.boltdepot.com/fastener-information/bolts/US-Recommended-Torque.aspx
https://www.boltdepot.com/fastener-information/bolts/US-Recommended-Torque.aspx
OP
Deleted member 21878
Guest
Guest
Offline
thanks for the info. just working on the rear at this point and did not see anything in the manual i have. used to having a list for things like shock links, spring bolts, etc on other cars i have worked on. guess i will measure all the bolts and used the table,,, plus lots of loc-tite.
but also remember having jam-nuts on the u-bolts that hold the springs to the axle... but my car did not have them when i took the axle out.
but also remember having jam-nuts on the u-bolts that hold the springs to the axle... but my car did not have them when i took the axle out.