• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Torque settings?

Share this page

S

Sportsdoc

Jedi Trainee
Offline
Does anyone have or can direct me to a complete listing of recommended torques for the 66 Sprite, 1098 engine? My factory manual lists a few, but it certainly is way less than a comprehensive list. Thanks.
 
Luke_Healey said:
I second that motion...

I'm looking for torque spec on the rear wheel bearing retaining nut, as well as the size of socket I'll need to buy.. I think 1 7/8"??
Click to expand...

I can check the axle nut socket size when I get to the shop, I had to modify mine, most socket have a rounded leading edge on them, and with the axle nut being so slim, it wouldn't let it seat properly, I ended up putting the socket in the lathe so I could turn the rounded end off and let the socket get all the way up on the nut.

140 ft. pounds is the factory torque for the axle nut, I don't use the cheesy tab washer and I clean all the threads on the nut and axle housing really good with brake clean and blow dry and then use red locktite on the nut.
 
Back
Top