• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

tops

Share this page

K

KC368

Freshman Member
Offline
I have a 77 mg midget and have found a leather shop who can replace a couple of snapes and fix a ziper on the toneau cover and boot. I have been looking and found some need brakets or bars that go across the midel for suport. but im not sure if the 77 requires a bracket or not I have no hardwhere for a bracket. I have ordered some clips and have figured out how to asemble themn but am not sure about brackets does and one have any thoughts or knolage of them.
 
KC368 said:
I have a 77 mg midget and have found a leather shop who can replace a couple of snapes and fix a ziper on the toneau cover and boot. I have been looking and found some need brakets or bars that go across the midel for suport. but im not sure if the 77 requires a bracket or not I have no hardwhere for a bracket. I have ordered some clips and have figured out how to asemble themn but am not sure about brackets does and one have any thoughts or knolage of them.
Click to expand...


Getting a Moss Motors catalog or a shop manual (Bentley) can help by way of the illustrations in them.
 
Not *quite* sure what you're looking for....

But at any rate, here's a picture of the newer Spridget tonneau frames.

For more info ~Click Here~

(Note: this question would be better on the "Spridget" forum and not here. This part of the forum is intended for "big" MGs (MGB, MGC, Magnette, TF, etc).

SPM-095.gif
 
Back
Top