-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Top frame storage brackets
- Thread starter Rut
- Start date
Share this page
Jim_Gruber
Yoda
Offline
Essentially as low as you can get to the floor and centered with top frame in place. I'm missing these as well on Bugsy II and I did have a picture from someone. I do have a nice set of brackets thanks to Ray and his spare parts stash.
BlueMax
Jedi Warrior
Offline
Make sure that when the bow is "popped" that the holders are high enough to put pressure on the top of the bow to stop it rattling but still low enough when the bow is "locked" to clear the back panel and be removed. I remember on one car I had, a thin strip of foam in that support channel helped to silence the rattle.