• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

tool for bleeding brakes?

Share this page

R

Rustybeast

Freshman Member
Offline
Newbie. Congratulations on your new forum. May it grow and prosper. Anyone had any experience bleeding the brakes on a RR Classic (93). The bleed screws in my calipers appear to be an odd in-between size (not quiet metric, not standard). Any clues? Thanks.
 
No idea if this applies to a RR, but on my other European vehicle the bleeders take a 7mm wrench. Not a tool that is usually found in your common metric wrench sets.
 
Seems to be just a little under 11mm. Will try it.
By the way, that is a very nice site with your restoration project. The car looks very nice.
 
Just a thought but try a Whitworth wrench if you have any......Their sizes are somewhat in between stnd and metric
 
Back
Top