• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

tool for bleeding brakes?

Share this page

R

Rustybeast

Freshman Member
Offline
Newbie. Congratulations on your new forum. May it grow and prosper. Anyone had any experience bleeding the brakes on a RR Classic (93). The bleed screws in my calipers appear to be an odd in-between size (not quiet metric, not standard). Any clues? Thanks.
 
No idea if this applies to a RR, but on my other European vehicle the bleeders take a 7mm wrench. Not a tool that is usually found in your common metric wrench sets.
 
Seems to be just a little under 11mm. Will try it.
By the way, that is a very nice site with your restoration project. The car looks very nice.
 
Just a thought but try a Whitworth wrench if you have any......Their sizes are somewhat in between stnd and metric
 
Back
Top