• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

To Glue or not to Glue... alas, poor Booby

Share this page

JimLaney

JimLaney

Senior Member
Offline
When I joined up I said I was a beginner, and here's some proof: Which fasteners should have loctite on them and which should have anti-seize? Do I want anti-seize on my head bolts or loctite or nothing?

In general I understand that if it might shake loose, I might want to use some color of loctite...but if I want to be able to get it out again and it gets hot or rusty, use anti-seize. Any better guidance than that?
 
Head bolts should be lubed with oil and torqued to spec. It is the stretching of the bolt that creates the clamping force and keeps the nut from backing off.
 
jim
Are you interested in just the head bolts, then see above, Or are you looking for general information about what bolts/nuts should be locktited, nylocked, torqued or never seized?
there are a lot of nuts and bolts on your LBC and all are treated differently. Suggest you ask specifically regarding each issue.
If you are not interested in concours use nylocks wherever the temperature will allow.
Anything that is going to get torqued needs to be lubed as torque is always measured as the fastner is being stretched and moving.
Neverseize is usually to protect dissimilar metals where galling could happen and freeze the fastener. IE steel sparkplugs in Aluminum heads.
As I said specific questions are better than generalalities
 
And use Loctite blue 242 on everything else. Check your manual etc., but (for example) torques vary depending on whether or not the threads are dry or lubed. I tend to use anti-seize on anything I want to occasionally undo (e.g. spark plugs), and loctite on everything else. I'm sure others will chime in with more specific, accurate, wisdom. Doug
 
I've also found that simply replacing spring lock washer with new ones makes sure things stay tight .
old lock washers have there corners at the split rounded off no longer bitting in and spring action weak.
 
Thanks all for your help. If I ask about each fastener, I'll spend life at the keyboard so generalizations are good direction pointers for me. Thank you again for the help!
 
Back
Top