• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Tires

Sheesh

145R13 = 5.70 in.

165/70/13 = 6.49in.

175/70/13 = 6.88 in.

185/70/13 = 7.28 in.

and

145R13 = 939.9 revs per mile

165/70/13 = 941.6

175/70/13 = 918.7

185/70/13 = 896.9
 
JPSmit said:
Sheesh

145R13 = 5.70 in.

165/70/13 = 6.49in.

175/70/13 = 6.88 in.

185/70/13 = 7.28 in.

and

145R13 = 939.9 revs per mile

165/70/13 = 941.6

175/70/13 = 918.7

185/70/13 = 896.9

yoda :smile:
 
JPSmit said:
kellysguy said:

now you're just getting silly

Na, density was my silly question.
grin.gif
 
I need new tires so I just got off the phone with Les Schwab.
They would put a set of Toyo Eclipse tires on for $390 out the door.
These are 70,000 tires but simply 'all season' and not a performance tire.
This is probably what I need but can anyone suggest a better idea?
Spending nearly $400 on tires so I want to be sure, being a charter member of the 'wee tight' club I don't want to just throw money at the first place I call.

I drive the car every day so putting 50K miles on over the next 5 years isn't out of the question.
 
Looking at Tire Rack, I can get the set of Sumitomo HTR4 in 175/70/13 shipped for $295. The ebay guy has them too but the shipping is a bit higher.
So these are better than the Epic tires at Big-O or the Toyo's at LS?
 
Ok, lets see if this link works:

https://www.tirerack.com/tires/TireSearch...amp;diameter=13

The Michelins have a $70 'reward card' which makes their prices seem a lot better.
Any tires there seem like keepers?

Also - if I go this way what should I expect when I take them to a tire place to get them mounted and balanced - this wold be on the aluminum slotted mags I've got.
Any idea what they should charge for that service?
 
Back
Top