• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Tire size substitution

Share this page

NutmegCT

NutmegCT

Great Pumpkin
Bronze
Offline
Probably old news to everyone here, but I found an article in Moss "British Motoring" summer 2004, to be very helpful in figuring out what "modern metric" tire could replace an old "inch" tire from the 1950s and 1960s.

For example, instead of paying for a "classic reproduction" 5.90-15 tire at $170, you could get a BFGoodrich 155/80R15 for $75. The 155/80R15 very closely parallels the measurements of the original 5.90-15.

I think the process of deciding is made very clear in the attached article.

Tom
 
Thanks J-P. Here's another, which also gives visual comparisons.

https://www.tacomaworld.com/tirecalc

I was always stumped by how to compare a "5.90-15" to a modern "xxx/xxRxx" type with the online calculators, as the early numbers don't show the aspect ratio.
 
When I needed tyres on the Jag, I did a lot of researching. I keep a copy of this handy.

Pre-1964 6.40X15

1965-1972 735-15

80-series
metric 185-15

Alpha-numeric
78 series E78-15

P-metric 75
series radial P195/75R15

P-metric 70
series radial P205/70R15



Optional Radials in 1960's: 185HR15 (factory)
As installed: 165R15 86T
 
Back
Top