• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Tips on removing fan shroud?

Share this page

T

tdskip

Yoda
Country flag
Offline
I tried gently tugging on it as I didn't want to pull too hard, but not dice. Any tricks to removing the shroud?

One cool bit I found was that the top housing has a stamp on it from back when it was built. Pretty cool.

Bugeyefanshroud1.jpg


Bugeyefanshroud.jpg
 
Take it to the radiator shop just as it is.
 
I once "removed" a valve cover on a '48 Chevy 6 with a 20 gauge.

Don't use anything less than #6 high brass though. :cowboy:
 
tony barnhill said:
Take it to the radiator shop just as it is.
Click to expand...

Oh crap - I had a replacement one <span style="text-decoration: underline">without</span> a shroud recored already. I though the shroud was removable.....
 
It is soldered on, if you must remove it, use a torch to melt the solder but be careful not to melt the solder holding the tank to the core.
 
Reason I said take it to radiator shop as is....they'll disassemble & reassemble.
 
Back
Top