• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Tips for locating/fixing foam rings under gas tank

Share this page

T

tdskip

Yoda
Country flag
Offline
Hi guys - any safe tips to pass along on how to keep these from moving while installing the fuel tank?

#5 below

TRS-015.gif


And do y'all install the neck/hose first (#16 above)

Thanks!
 
A little DumDum or contact cement works, or something sticky works.
 
Re: Tips for locating/fixing foam rings under gas

I've used spray adhesive and rubber cement with good results before on the TR8 foam strips. If the foam is bad, you can get rubber/foam gaskets that are used for sealing boat hatches at Walmart and similar places.
 
Back
Top