• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Tips for fitting tub on TR3 prepared frame

Share this page

This is like a party! I am just about at the same point as all you guys! Whoo hooo! I have to fine tune some stuff but I will be having the body painted by the start of September and then "putin the buggar" onto the frame! here are some pics; Chassie one year ago (Aug 2012), now (Aug 2013) and body work prep (July 2012)! This is so great! Cheers to all!

Engine & chassis full view Aug 1 2012 email large.jpgEngine on chassis (1) Aug 1 2013 email lg.JPGBody Work May 31 2012.jpg
 
Dorn
Looking good. Good seeing you at the show on Thursday.
 
TR4nut, yes the 3/32" is the difference between the top and bottom gaps of the rear door edge with the bottom gap being wider. Right now I have 4 shims on each outrigger. Should I add another shim to each outrigger?
 
John_Progess said:
TR4nut, yes the 3/32" is the difference between the top and bottom gaps of the rear door edge with the bottom gap being wider. Right now I have 4 shims on each outrigger. Should I add another shim to each outrigger?
Click to expand...
That is what I'd try as a first shot, it worked for me.
 
Back
Top