• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 Tinster's TR6 front suspension restoration part 1?

Share this page

I

ichthos

Darth Vader
Country flag
Offline
I was able to find Tinster's article "1969 Triumph TR6 Front Suspension Restoration Project" parts two and three, but I can not find part one. Can anyone email me this article or do they know where I can download this?

Thanks, Kevin
 
Thanks, but I have the part two (installation procedures). I also have part three (sway bar and radiator sheild refurbish). I still need part 1, which I am hoping is dismantling procedures. I sent a pm to Tinster, but I need to get going on this project. It seems like TR6 people are scarce in the past few weeks. If I get desperate, I'll just jump in. I do have a Bentley manual, but I found Dale's last article on the rear suspension very helpful - especially in avoiding some big mistakes.

Kevin
 
The steps to disassemble are easy - procedure in the manual works fine if you have a Bentley manual on hand. I found the spring pan a bit of a pain but everything else was pretty easy. Just make sure to be careful with the spring....
 
Kevin - now you've got me curious.

Where did you hear/read there's a "part 1"? and where'd you find the "part 2" and "part 3" articles? I didn't know about any other than the one we linked above.

Thanks.
Tom
 
I don't really know if there is a part one, but I thought it would make sense since there is a part two and three. I found both articles by just doing a general internet search. Part 2 was easy to find, but part 3 was a little more difficult. They were both at scribd.com

Kevin
 
Back
Top