• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Time for a new windshield

The long extra section of the seal as shown in Healey Nut's photos is held in place by the windshield post push-on seal, which should continue onto the flange of the front fender, instead of being cut as shown. I will look for a photo.
Bob

Nope :nonono: Healeynut is correct !
 
Yes please post a photo B_R! Is there an extra part involved? Having trouble visualizing this.
 
Here's a photo from the Anderson-Moment book. It has also been posted earlier by Dave Russell ( 11-14-2012 ) in a thread about Bristleflex on a front pillar, to get a clearer picture.
Bob image.jpg
 
Scot,
if you search this site for " Bristleflex installation ", you will get a few links to threads. Go to the one started by sunkissedhealey and you will see a post by Dave Russell with the photo.
I was unable to link it directly.
Bob
 
Back
Top