• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Tie rod end replace

Share this page

John_Mc

John_Mc

Jedi Knight
Offline
To remove the tie rod ends from the inner ball joint assembly, what's the preferred technique? My first thought is "pipe wrench". Anything less aggressive work?
 
If you don't want to scratch up the inner rods, I think just a good pair of channel locks would work - they would give you a pretty good grip on the rod. You could also pad the jaws with small pieces of old rubber hose or something to cushion the grip.

Randy
65 TR4
 
... and use heat (propane or MAPP) around the outside to expand the metal to make things come apart easier.
 
Back
Top