• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Tie rod end replace

Share this page

John_Mc

John_Mc

Jedi Knight
Country flag
Offline
To remove the tie rod ends from the inner ball joint assembly, what's the preferred technique? My first thought is "pipe wrench". Anything less aggressive work?
 
If you don't want to scratch up the inner rods, I think just a good pair of channel locks would work - they would give you a pretty good grip on the rod. You could also pad the jaws with small pieces of old rubber hose or something to cushion the grip.

Randy
65 TR4
 
... and use heat (propane or MAPP) around the outside to expand the metal to make things come apart easier.
 
Back
Top