• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

tie rod end mounting

Share this page

Jer

Jer

Jedi Warrior
Country flag
Offline
I got a tie rod end set for my 67' everything looks fine & they installed okay - however the new tie rods mounted to the spindle with a "nylock" nut instead of a slotted nut with cotter pin. Just wanting to make sure that I got the right ones, I noticed that some later midgets had the nylock nut - I'm assuming that this is the "replacement" style that covers a broader range of years ?
 
The lock nuts will work fine. Watch your inner wheel clearance if you are not using the stock wheels.
 
Lock nuts on my replacements as well - had to do a little grinding to clear my Minator rims though.
 
Back
Top