• Hi Guest! Being a Paying Supporter is NOT a requirement to participate at BCF. However, subscribing will help ensure we can continue to serve the LBC community for years to come. If you enjoy BCF and find our forum a useful resource...Please consider supporting us by **Upgrading**
    (PS: Subscribers don't see this banner)

TR2/3/3A Tie Member for TR-2


Jedi Warrior
Country flag
I am restoring a 1954 TR-2 and seem to be missing a part. It's the Tie Member that connects the front inner fenders right under the hood. It is connected with a single bolt on each side, through brackets.

None of the parts places don't carry it. If anyone has a spare, you would like to part with, I would gladly buy it, if you don't need it.




Jedi Warrior
Country flag
It is the bar that connects the top of the inner fenders. It attaches with a single bolt through a bracket on each side.


Disregard, I found it!

Similar threads
Thread starter Title Forum Replies Date
F TR2/3/3A Tie member[front apron support tube] Triumph 11
K TR2/3/3A Removal of tie rod end? Triumph 7
B TR4/4A Outer tie rods Triumph 8
K TR2/3/3A New Tie rods and Ends Triumph 3
AH67AH Tie Rods / Alignment Austin Healey 3
Phil73 TR6 VERY tight Tie Rod ends Triumph 1
K TR2/3/3A Isit possible to buy a single left hand thread tie rod end? Triumph 5
K TR2/3/3A Inner tie rod ball joint. Triumph 6
K TR2/3/3A TR3 Tie Rod Sleeve Triumph 1
K Wanted TR3 Tie Rod Sleeve Triumph Classifieds 2
Got_All_4 TR2/3/3A Inner tie rod ends Triumph 4
TAS525 TR2/3/3A Missing zerk from inner tie rod end Triumph 7
M Hauling a Spridget - Proper tie down technique? Spridgets 15
D TR2/3/3A tie rod end Triumph 17
D TR2/3/3A 7.68, outer tie rod Triumph 4
Feathers 289I inner tie rod end. TVR 0
S TR4/4A Tie rod end rubber replacement Triumph 6
S TR4/4A Tie rod end rubber replacement Triumph 1
Bruce Bowker For Sale MG Tie Clip MG Classifieds 1
D TR4/4A inner tie rod ball joint tension Triumph 0
Jim_Gruber Suspension Reinstall / Fitting Steerig Arm to Tie Rod End Spridgets 15
steveg Tie Rod boots - urethane Austin Healey 22
Patrick67BJ8 Tie Downs for a BJ8 Austin Healey 17
Got_All_4 TR2/3/3A How to use these Aluminum tie tabs Triumph 7
W Inner Tie Rod Spridgets 3
B Tie Rod - Engine: What is it and where does it go? Austin Healey 12
A TR4/4A Short or long tie rod end levers on TR4a Triumph 6
D TR6 Tie-rod problem Triumph 4
S What do you use instead of tie wraps? Austin Healey 7
R Tie rods zerk Austin Healey 32
jlaird Tie down Spridgets 0
jlaird Rear tie downs for old folks Spridgets 20
M Tie rod end came apart easy - too easy? Spridgets 6
T TR4/4A Outer tie rod ends - what's the trick? Triumph 7
DornTRoriginal TR2/3/3A Tie Rod Adjustment Triumph 6
Sopwith_Camel Tie rod ends Spridgets 12
P Tightening Tie Rod Ends? Spridgets 4
H TR4/4A Tie Rod In Door - TR4 Triumph 5
A MGB tie rod ends in A-H? Austin Healey 1
W tie rod replacement Triumph 4
Boink Tie-rod ends... types Spridgets 7
gbtr6 TR6 Question on TR6 trunnions and inner tie rod ends Triumph 6
Willie_P TR4/4A tr4 tie rod end/ball joint - technical question Triumph 2
R TR4/4A 1966 TR4a , outer tie rod question Triumph 7
PatGalvin Tie Down Those Brake Lines to the Diff Triumph 4
Stinger TR4/4A TR4A Inner Tie Rod and Ball Joint Triumph 8
M TR2/3/3A TR3 tie rod ends Triumph 6
T TR4/4A Question on inner tie-rods for TR4a Triumph 3
Basil EType Tie-rods Jaguar 2
G Separate pitman arm from center tie rod Triumph 4

Similar threads