-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A Throttle cable instead of the linkage??
- Thread starter Jerry
- Start date
Share this page
Darrell_Walker
Jedi Knight
Offline
Hi Jerry,
Ratco makes a cable pull setup for the TR6, and I was able to modify it for my TR4A (though that was for the Webers I had at the time). Their kit might give you some ideas for your car, though the bodies are different of course. Also, the Moss supercharger kit uses a cable pull, and the instructions show the bracket that they use, so perhaps some ideal there. It really just comes down to making brackets on each end of the cable.
-Darrell
Ratco makes a cable pull setup for the TR6, and I was able to modify it for my TR4A (though that was for the Webers I had at the time). Their kit might give you some ideas for your car, though the bodies are different of course. Also, the Moss supercharger kit uses a cable pull, and the instructions show the bracket that they use, so perhaps some ideal there. It really just comes down to making brackets on each end of the cable.
-Darrell