• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Threads

Share this page

DNK

DNK

Great Pumpkin
Offline
TR6 , the adapter from the manifold pipe to the thermostat housing.
BSP ,yes but does any one know if it is BSPP or BSPT???
 
I'm not even certain it's BSP, since similar connections on the TR2-4 are NPT.

However, if it is BSPP (parallel threads), then there will be some other arrangement for sealing, like a fiber washer. Only tapered threads are self-sealing.
 
There is a washer on it which makes me think BSPP

t6bluebook076.jpg
 
That part looks very much like the PCV connection to the intake manifold on the 4A. Definitely an odd size, and not tapered threads.
 
Don, I just sold my spare a few weeks ago so I can't go down and check it for you. I cannot find the spare fitting that goes in there either.
 
Don,

Do you need the fitting, or just want to screw something in the hole? I have an extra or two (assuming the 4A version is the same). Let me know.

-Darrell
 
Actually trying to wrestle one out of a spare housing. Everything came off but that bugger.
Gonna put an adapter to NPT there.
 
DNK said:
Actually trying to wrestle one out of a spare housing. Everything came off but that bugger.
Gonna put an adapter to NPT there.
Click to expand...

Cut the end off, and tap what is left?
 
I kind of screwed up the one I had by trying to tap it. Not a lot of meat there
 
Well, never mind.
Broke it off trying to get it out.
Ended up taking it (or is that bring it) to the machinist and he tapped it to 3/8's NPT
.
.
.
.
Of course this was after I drove to S. Seattle to get the adapter!! :madder: :madder:
 
Back
Top