Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Healey Nut
Luke Skywalker
Offline
BT7 engine for my Tri-Carb Rally recreation.
.030” over bored, new pistons, had to sleeve two bores, new mains and rod shells, etc., etc.
Checked and triple checked.
Timing gear marks, check.
15 links mark to mark, check.
#1 piston at TDC, with valves “on the rock,” check.
Distributor drive at 10 past 8ish, check.
Head now on and torqued, will re-torque on the weekend.
Rocker shaft, etc. is next.
Then check valve timing for the final time and bend tabs on timing gear lock washers and timing cover on.
.030” over bored, new pistons, had to sleeve two bores, new mains and rod shells, etc., etc.
Checked and triple checked.
Timing gear marks, check.
15 links mark to mark, check.
#1 piston at TDC, with valves “on the rock,” check.
Distributor drive at 10 past 8ish, check.
Head now on and torqued, will re-torque on the weekend.
Rocker shaft, etc. is next.
Then check valve timing for the final time and bend tabs on timing gear lock washers and timing cover on.
Attachments
Last edited by a moderator:
