Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
The turn signals have stopped working and I know it's an issue this assembly. I have had the long wiring tube out before and I am familiar with the grub screws an how the long tube slots into the stator tube. Looking at the back of the horn button assembly there is a moveable plate with a 2 pronged extension on it. I believe this extension is to be situated 180 degrees from the turn signal switch. On the grey metal part behind the plate there looks like a groove that is either a "stop" for that extension piece or maybe the extension piece is supposed to fit in that groove and i assembled it wrong the last time I was in there??? Does anyone have a picture of this area and also a link to the assembly dismantling ? Thanks Karl
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR2/3/3A The horn and turn signal assembly.
- Thread starter karls59tr
- Start date
Share this page
Karl, here are a couple of good links:
drive.google.com
Hope this helps,
Bob
TR3 Control Head-disassemble - Clive Elsdon.pdf
drive.google.com
Hope this helps,
Bob
